Photo By yuratosno3 at Shutterstock
If you are like most homeowners in Conway, SC, you don’t think about your home’s plumbing system too often. As long as the water comes out of the faucets and flows freely down the drains, your plumbing system is the furthest thing from your mind. It isn’t until things start to go wrong that you become concerned, and then need to call a licensed plumber. The best way to protect your home’s plumbing system is to be able to recognize the signs that you need to call a professional, and you call as quickly as possible.
#1 Slow or Clogged Drains
If the drains in your home are draining slowly or if they don’t drain at all, it can make many household tasks challenging and even impossible. Simple everyday things like washing the dishes, cooking, and taking a shower can be difficult. Many homeowners will try to use a liquid drain cleaner to remove the clog. This isn’t the best idea. These products can be expensive, and there is no guarantee that it will work. Also, excessive use of these products can cause damage to the pipes. If your drains are not working correctly, it is best to hire a licensed professional. A licensed professional will have the necessary equipment to remove the entire clog. If the plumber cannot figure out what is clogging the drain, they can send a snake down the drain with a small camera attached to get a good look inside the pipes.
#2 Dripping Faucet
To many homeowners, a dripping faucet isn’t a significant cause for concern. Once you get used to the dripping sound, it is easy to forget that there is a problem. If your faucets are dripping, you should call a plumber right away. If the faucet is dripping, it is a sign that there is an issue with the faucet that should be repaired by a licensed professional before the problem gets worse. Also, a dripping faucet can waste a great deal of water. Over the course of a year, the dripping faucet can waste over 3,000 gallons of water. Not only is this bad for the environment, but it will also cause your water bill to increase. As soon as you notice that your faucet is dripping, you should call a licensed professional.
#3 No Hot Water
Hot water is essential in your Conway, NC home. You need hot water to shower, do laundry, wash dishes, and to perform a number of other daily tasks. If you turn on the hot water and it comes out cold, you will need to call a licensed plumber. The problem is likely due to a broken element in the water heater. This is something that should only be repaired by a professional. If you try to handle the job yourself, you could end up doing more harm than good. Also, if your water heater is under warranty, making the repair yourself could void the warranty. Most companies require a licensed professional to handle all water heater repairs.
#4 The Water Isn’t Getting As Hot As Usual
If you turn on the hot water, but it isn’t heating up enough, there is something you should do before calling a plumber. First, you should check to make sure that the thermostat is set correctly. According to the Consumer Product Safety Commission, your water heater should be set no higher than 120 degrees Fahrenheit. If your thermostat isn’t set correctly, the problem should be solved once you turn it up. If the thermostat is set to 120 degrees and the water still isn’t heating up, you should call a licensed professional. The problem could lie within the thermostat. It could also be that one of the heating elements isn’t functioning correctly. It would take the knowledge and experience of a licensed professional to find the source of the problem and make the necessary repairs.
#5 The Water Comes Out Rusty
If your water comes out brown, you should call a licensed plumber immediately. The brown that you see is likely rust that has corroded the pipes and is coming out in the water. It is dangerous to drink rusty water and to bathe in it. Until you call a plumber, it won’t be safe to use the water. If both the hot and cold water comes out rusty, the problem is likely in the water pipes. If only the hot water is coming out rusty, the issue probably lies within the water heater. Over time, sediment can build up inside the hot water tank. When this happens, it will cause the hot water to come out rusty. It is essential that you call a professional as soon as you notice the brown water.
#6 Running Toilet
When you flush your toilet, it should run only until the tank is filled up again. When the tank is full, it should stop running. If your toilet runs continuously, you should call a licensed plumber. When the toilet fills with water, a flapper should drop down, signaling that the tank is full. If the flapper is cracked or the valve seal is cracked, the toilet will keep running. Not only is a running toilet annoying, but it wastes a lot of water. As soon as you realize that your toilet is continuously running, you should hire a licensed plumber. The technician can inspect the toilet and determine if it needs to be repaired or replaced.
If you are experiencing any plumbing issues in your home, you should contact the professionals at Benjamin Franklin Plumbing of Myrtle Beach, SC. We have been serving residential and commercial customers in and around Myrtle Beach for over ten years. Every technician on staff is fully licensed and insured, giving you peace of mind that the job will be done right the first time. We understand that plumbing issues can occur at any time, day or night; therefore, we offer emergency service. If you are experiencing any plumbing issues in your Conway, SC home, give us a call. We will send a professional, qualified technician to your home to make the necessary repairs.