5 Reasons Behind Why A Dishwasher Won’t Drain: Call A Plumber Today | Myrtle Beach, SC

3/21/2021

Photo By AndreyPopov at istock

Have you tried turning on your dishwasher and found that the water inside simply won’t drain? This might prevent you from using the dishwasher entirely. The first thing that you should do is to try to get rid of as much of the water as possible. After that, you should contact a plumber in Myrtle Beach, SC to come and take a look at the problem.

If you do not get a professional to quickly fix the issue, the water may end up spilling out. In some situations, the reason why the dishwasher won’t drain is related to a simple solution. In other situations, it will require a complex repair job. Below, we’ll look at some of the most common reasons why the dishwasher isn’t draining.

#1. The Garbage Disposal Pipe Is Clogged

In order to first understand why your dishwasher isn’t draining, you first need to know where the water goes. In general, the water will be drained from the dishwasher into a connecting hose that runs through the sink. If the garbage disposal is full or if there is an air gap in the pipe, it’ll prevent the dishwasher from draining completely.

The easiest solution is to simply run the disposal for anywhere from 30 seconds to one minute. This should fix the issue immediately. However, it’s not a permanent fix. You should still call a plumber in Myrtle Beach, SC to come take a look at the situation. In most cases, you need to get the drains professionally cleaned. This is especially true if the dishwasher is constantly failing to drain.

#2. There’s a Blockage Inside the Dishwasher

Do you rinse all of the dishes before you toss them in the dishwasher? Or, do you simply toss everything in immediately?

If you fall in with the latter, the reason why the dishwasher might not be draining is because there’s a blockage within it. In general, this means that there’s a piece of food that’s fallen off the rack and is now lodged at the bottom of the dishwasher. This will block the flow of water and prevent proper drainage.

The solution for this is fairly simple. All you have to do is to open the dishwasher and clean the bottom of it. You should also remove the bottom component as food items can easily get lodged within.

#3. The Dishwasher Is not Properly Loaded

A similar reason is if the dishwasher is not loaded properly. Some people really do not know how to load a dishwasher. Fortunately, you should be able to find all of the directions that you need in the manufacturer’s instructions are the owner’s manual. If the dishwasher is failing to drain, the problem might be because some of the dishes are blocking the flow of the water. If you simply rearrange the way that the dishes are loaded into the dishwasher, you should be able to solve the problem immediately.

#4. The Filter Is Dirty

Surprisingly, many people don’t realize that their dishwasher relies on the filter. The filter is usually located somewhere at the bottom of the dishwasher. With time, this filter can get clogged up. If this happens, the dishwasher will not drain properly, so you should either change or clean the filters every once in a while.

Most plumbers will recommend that you clean the filters the moment that you smell something weird coming from it. You might be able to smell remnants of food when you open the dishwasher.

Not many people know where the filter is located. On top of that, not many people know how to change the filter. The best thing that you can do is to call a plumber for the job. Plumber will be able to not only replace or change the filters, but he or she will also be able to look at the filter in order to tell you whether you should switch to a new one. Different types of filters have different efficiencies.

#5. The Drain Pump or Motor Is Malfunctioning

Like with every type of plumbing appliance, wear and tear is inevitable. If your dishwasher is failing to drain, the problem may lie with the drain pump or motor. You can usually tell that there’s a problem if you listen to the machine while it is running. If there’s something wrong with the drain pump or motor, you should be able to hear some type of humming or clicking sound coming from the dishwasher.

This definitely isn’t a problem that you can try to fix yourself. You’ll need to ask the plumber to come inspect the unit in order to see what’s wrong. The plumber will need to take everything apart in order to look at the underlying pumps and motors. They’ll also need to determine the type of motor and pump parts that are needed for the repairs.

If the damage is too severe, the plumber may recommend that you replace the drain pump or motor entirely. If this happens, you might need to think about whether you would want to have the same part from the same brand or whether you would be happy with an aftermarket part that can do the same job. You will also need to consider whether using an aftermarket part will void your warranty.

Call In the Professionals

Is your dishwasher not draining? Or, are you faced with some other type of plumbing issue that’s giving you a headache?

No matter what the problem is, consider giving Benjamin Franklin Plumbing of Myrtle Beach a call. Our plumbers are licensed, insured and properly trained. They also receive ongoing training, so they are always well aware of the newest technologies that are used in the plumbing industry. They’ll be able to inspect your plumbing in order to quickly determine what the cause of the problem may be. From there, they’ll be able to recommend several solutions for you to choose from.

Rest assured that you’re in good hands!